Yaris L4-1.5L (1NZ-FE) (2007)
3. REMOVE INTEGRATION RELAY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
b. Disconnect the 3 connectors.
INSTALLATION
1. INSTALL INTEGRATION RELAY
a. Connect the 3 connectors.
b. Attach the integration relay to the engine room relay block.
2. INSTALL RELAY BLOCK COVER NO.1
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)