Yaris L4-1.5L (1NZ-FE) (2007)
b. for LH Side:
1. Install the rear seat inner belt with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
NOTE:
-
Install the anchor plate with the arrow mark facing forward.
-
Do not place the anchor plate over the locating mark area of the floor panel.
2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
a. for 60/40 Split Seat Type:
1. Install the rear seat cushion cover pad.
b. for Fixed Seat Type:
1. Install the rear seat cushion cover pad.
Rear Seat Inner Belt Assembly (For Hatchback LH Side)