toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Procedures|Page 6875 > < Procedures|Page 6873
Page 62
background image

d. for LH Side:

1. Remove the 3 screws.
2. Disengage the 3 clips and the 3 claws.
3. Disconnect the luggage compartment room light connector and remove the deck trim side panel.

16. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
17. REMOVE ROOF SIDE INNER GARNISH

a. for RH Side (w/ Curtain Shield Airbag):

NOTE:  Replace the special clip with a new one because it is damaged when the roof side inner garnish is removed.

1. Disengage the 4 clips and the claw.
2. Pass the rear seat outer and rear center seat outer belts through the slit in the roof side inner garnish and remove the roof side inner garnish.

Procedures|Page 6875 > < Procedures|Page 6873