Yaris L4-1.5L (1NZ-FE) (2007)
d. Confirm that there is no looseness by shaking the rear airbag sensor.
e. Connect the airbag connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
a. Engage the 3 clips and the 6 claws and install the deck trim side panel.
b. Tighten the 3 screws.
HINT: When installing the rear seat outer belt assembly RH connect the room light connector and install the deck trim side panel assembly
RH.
3. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH