Yaris L4-1.5L (1NZ-FE) (2007)
/Page-89002.png)
a. Disconnect the connector and the harness clamp.
b. Remove the 3 bolts.
c. Disconnect the hood lock control cable, then remove the hood lock.
INSTALLATION
1. INSTALL HOOD LOCK ASSEMBLY
a. Connect the hood lock control cable.
b. Install the hood lock with the 3 bolts.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
c. Connect the connector and the harness clamp.
