Yaris L4-1.5L (1NZ-FE) (2007)
/Page-154002.png)
3. REMOVE STOP LIGHT SWITCH
a. Remove the stop light switch connector from the stop light switch.
b. Turn the stop light switch counterclockwise and remove it.
INSTALLATION
1. INSTALL STOP LIGHT SWITCH
a. Install the stop light switch into the adjuster until it slightly touches the brake pedal.
NOTE: Do not depress the brake pedal.
1. Make a quarter turn clockwise to install the stop light switch.
NOTE: Do not depress the brake pedal.
HINT: The turning torque for installing the stop light switch is as below.
