Yaris L4-1.5L (1NZ-FE) (2007)
(e)
Turn the lever counterclockwise until it stops, then turn it clockwise 2 notches.
(f)
Remove the control shaft lever.
(g) Align the groove with the neutral basic line.
(h) Hold the switch in this position and tighten the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(i)
Using a screwdriver, stake the nut with the lock plate.
(j)
Install the control shaft lever with the nut and washer.
Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
(k) Connect the connector to the park/neutral position switch assembly.