Yaris L4-1.5L (1NZ-FE) (2007)
c. Remove the screw indicated in the illustration and remove the steering column cover.
3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Disengage the 2 claws and remove the ignition or starter switch assembly.
INSTALLATION
1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
a. Engage the 2 claws and install the ignition or starter switch assembly.
b. Connect the connector.
2. INSTALL STEERING COLUMN COVER
a. Install the screw indicated in the illustration.