toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1102 > < Initial Inspection and Diagnostic Overview|Page 1100
Page 3
background image

3. Approximately 6 seconds after the ignition switch is turned to the on position the passenger airbag ON/OFF indicator will be ON/OFF

depending on the conditions listed.

HINT: 
-

The passenger airbag ON/OFF indicator operates based on the timing chart as given in order to check the indicator light circuit.

-

When the occupant classification system has trouble both the SRS warning light and the passenger airbag ON/OFF indicator (OFF)
come on. In this case check the DTCs in the airbag system first.

4. PASSENGER AIRBAG ON/OFF INDICATOR CHECK

a. Turn the ignition switch to the on position.
b. Check that the passenger airbag ON/OFF indicator (ON and OFF) comes on for approximately 4 seconds then goes off for approximately 2

seconds.

HINT:  Refer to the table in the previous step regarding the passenger airbag ON/OFF indicator when approximately 6 seconds have elapsed
after the ignition switch is turned to the on position.

Initial Inspection and Diagnostic Overview|Page 1102 > < Initial Inspection and Diagnostic Overview|Page 1100