Yaris L4-1.5L (1NZ-FE) (2007)
COMPONENTS (Part 3)
REMOVAL
HINT: Use the same procedure for both the RH and LH sides.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a)
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL
6. REMOVE COMBINATION METER ASSEMBLY