Yaris L4-1.5L (1NZ-FE) (2007)
5. REMOVE FRONT AXLE HUB NUT
(a)
Using SST and a hammer, release the staked part of the axle hub nut.
SST 09930-00010
NOTICE:
^
Insert SST into the groove with the flat surface facing up.
^
Do not damage the tip of SST using grinders.
^
Completely unstake the staked part before removing the axle hub nut.
^
Do not damage the threads of the drive shaft.
(b) Using a 30 mm socket wrench, remove the axle hub nut.
6. SEPARATE FRONT SPEED SENSOR (w/ ABS)
(a)
Remove the bolt and separate the speed sensor and flexible hose.
(b) Remove the bolt and separate the speed sensor from the steering knuckle.
NOTICE:
^
Keep the speed sensor tip and installation portion free of foreign matter.
^
Remove the speed sensor without turning it from its original installation angle.
7. SEPARATE TIE ROD END SUB-ASSEMBLY
(a)
Remove the cotter pin and castle nut.