Yaris L4-1.5L (1NZ-FE) (2007)
1. REMOVE FRONT AXLE HUB HOLE SNAP RING
(a)
Using snap ring pliers, remove the hole snap ring.
NOTICE: When removing the hole snap ring, do not damage the magnetic rotor surface.
2. REMOVE FRONT AXLE HUB SUB-ASSEMBLY
(a)
Fix the steering knuckle in a vise between aluminum plates.
NOTICE: Do not overtighten the vise.
(b) Using SST, remove the axle hub.
SST 09520-00031
(c)
Using SST, remove the hub bearing inner race from the axle hub.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011), 09950-60010
(09951-00370)