Yaris L4-1.5L (1NZ-FE) (2007)
3. REMOVE FRONT ARMREST BASE PANEL UPPER
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and clip and remove the front armrest base panel upper.
b. Disconnect the connector.
4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Disengage the 2 claws and remove the power window regulator switch.
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Engage the 2 claws and install the power window regulator switch.
2. INSTALL FRONT ARMREST BASE PANEL UPPER
a. Connect the connector.
b. Engage the 5 claws and clip and install the front armrest base panel upper.