toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Passenger Side Power Window Switch (For Hatchback)|Page 8961 > < Front Passenger Side Power Window Switch (For Hatchback)|Page 8959
Page 4
background image

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT ARMREST BASE UPPER PANEL

3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.

INSTALLATION

1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY

a. Engage the 2 claws and install the power window regulator switch.

2. INSTALL FRONT ARMREST BASE UPPER PANEL
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

Power Window Master Switch (For Hatchback)

POWER WINDOW MASTER SWITCH (For Hatchback)

Front Passenger Side Power Window Switch (For Hatchback)|Page 8961 > < Front Passenger Side Power Window Switch (For Hatchback)|Page 8959