Yaris L4-1.5L (1NZ-FE) (2007)
NOTICE: Do not damage the vehicle body.
HINT: Leave as much adhesive on the vehicle body as possible.
2. Clean the contact surface of the vehicle body with a shop rag or piece of cloth saturated with cleaner.
HINT: Clean the vehicle body even if all the adhesive has been removed.
3. INSTALL WINDSHIELD GLASS STOPPER NO. 1
a. Install 2 new stoppers onto the vehicle body, as shown in the illustration.
4. INSTALL WINDSHIELD GLASS STOPPER NO. 2
a. Apply Primer G to the installation parts of the stoppers.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
b. Install 2 new stoppers onto the windshield glass, as shown in the illustration.
5. INSTALL WINDOW GLASS ADHESIVE DAM
a. Apply Primer G to the installation part of a new dam, as shown in the illustration.