Vauxhall Workshop Service and Repair Manuals

Legend for Welding Operations  

Process:
RP = Resistance spot welding
SG = Inert arc (shielded gas) welding	MIG (inert gas metal arc)
	MAG (active gas metal arc)
Brazing

 

Equipment: equipment offered from the Opel Workshop Equipment Manual/ Vauxhall Workshop Equipment Manual.     1  Shielded arc welding unit   2  Spot welding tongs   3  Multispot M 80 (combined device for spot welding, pulse welding)   4  Airpuller AP 95 for straightening out

Legend for Welding Operations (Continued)  

Notice:  The necessary pressure of the electrodes during resistance spot welding using hand-held spot weld pliers is not sufficient with electrode brackets having a length of over 40 cm/15.8 in!   Use electrodes up to maximum 40 cm. Shielded arc welding must be performed on inaccessible areas.   Symbols:     1  Resistance Spot Welding   2  Plug spot welding, shielded gas welding   3  Stitch seam spot welding, shielded gas welding   4  Full seam, shielded gas welding   5  Full seam, broken, shielded gas welding   6  Brazing   7  Gas welding   8  Number of spot welds