System 17, Two-colour paint applications on plastic surfaces
System 17, Two-colour paint applications on
plastic surfaces
System 17
Two-colour paint application
Water base coat
2-C HS clear coat
VOC clear coat
Water base clear coat
Paint repair
Corsa-C: Black / Blue & Silver
Agila: Njoy
Surface:
PP / EPDM plastic
On primed or textured new parts and 2-coat production paint
applications
Operational procedure
Paint stage
Products
Notes
I
II
III
Cover the surface
x
Masking paper
Film
in the area of trim strips / radiator grille.
Masking
Clean
x
Aqueous degreaser
Sand
x
Blend prep
Surface treatment
Clean
x
Aqueous degreaser
Apply bonding agent
x
2C plastic primer
Apply one thin coat
Apply somewhat over the edge of the damaged area
to overlap.
Allow to set for 10 minutes.
Clean
x
Aqueous degreaser
Spray silver base paint
x
Water base coat
Apply two feathering thin single coats wet on wet. Allow to
flash dry until surface has dried matt. Setting time prior to clear
coat application 15 minutes.
Cover silver area
x
Masking paper
Spray black base paint
x
Water base coat
See silver base paint
Spray clear coat
x
As required.
2-C HS clear coat
VOC clear coat
Water base clear coat
Prespray one layer. Setting time 3 to 5 minutes. Final spraying
with one more layer. Setting time 8 minutes prior to oven
drying.