Rubber Weatherstrip, Sash Window Pane of Front Door, Replace - Model-53 B
Remove, Disconnect Lower sash window. Cut off rubber cap (1) at upper edge of sash window guide rail (2) only in front. Pull rubber weatherstrip, sash window pane from sash window guide rail.
Install, Connect |
|
Cut rubber cap of new rubber weatherstrip for sash window pane acc. to dimensions of old rubber cap, fit and if necessary re-cut.
Important! Only cut off the short part of the rubber weatherstrip from the rubber cap!
Install, Connect Guide rubber weatherstrip, sash window pane in sash window guide rail. Coat intersection point of fixed rubber weatherstrip (3) with 1-component adhesive (cyanoacrylate) and press on rubber cap. Close sash window. |
|
|