Front Seat, Remove and Install
 Remove, Disconnect
|
1 |
1 stud of front outer cover and remove to the rear. |
|
2 |
Inner rear cover, 2 lugs |
| 
|
 Important!
|
3 |
Before removing the seat, it is important to insert the retaining fork fastened to the energy store in the opening provided in the seat belt tensioner - see operation "Seat belt tensioner, remove and install or replace". |
Remove, Disconnect
|
4 |
Remove front seat. |
|
|
4.1 |
2 bolts front |
|
|
4.2 |
2 bolts rear |
 Install, Connect Front seat.
 Tighten (Torque) 5 screws to underbody - tightening torque 20 Nm, observe sequence 1 to 4 . Use new screws. Remove securing fork. Front and rear covers. |
|
|
