Panelling of Rear Quarter Panel, Front, Remove and Install - Model 53-B
Remove, Disconnect Quarter panel upper stop buffer - see operation "Quarter panel upper stop buffer, remove and install or replace - Model 53-B", rubber weatherstrip outside panel - see operation "Rubber weatherstrip outside panel, remove and install or replace - Model 53-B". rear seat - see operation "Rear seat, remove and install - Model 53-B". 1 stud, panelling of rear quarter panel, front (1). Unclip cover handle (2), Handle - 2 bolts (3), Press through belt lock and plugs (4), Thread out guide lip of door weatherstrip, KM-803-2 (5). 1 stud (6), 1 stud, belt guide rail (7), 1 clip (8), |
|
Remove, Disconnect 1 stud, lower belt mount (9), 1 clip (10), 1 stud, 1 nipple, loosen 1 sill panel clip at console retractor (11), press through belt lock and plugs (12), separate wiring harness plug for electrical window winders and loudspeakers.
Install, Connect Front quarter panel. Quarter panel upper stop buffer. Rubber weatherstrip outside panel. Rear seat. |
|
|