Rear panel shelf, top, reinforce, Model 53-B to Ident.-No. 53RB007378
Upper Rear End Panel Shelf, Reinforce - Model 53-B up to Ident. No. 53RB007378
Remove, Disconnect
Detach rear screen frame bracket (3) at bottom from bulkhead. Remove left and right retainer strips for inner covering (2). Detach 4 plug clips (1) at rear. Lift upper rear end panel shelf at rear, do not kink.
Important!
Carefully open folding hood. Ensure that the rear screen frame bracket does not damage the folding hood.
Install, Connect
Separate seam of continuous edge protector (2) 25-30 mm/1-1.2 in. (3). Guide reinforcement wire (1) into edge protector. Cement separated area with instant adhesive. Carefully close folding hood. Fasten upper rear end panel shelf with 4 plug clips. Attach inner covering retaining strips. Bolt on rear screen frame bracket.