Safety belt rear, remove and install or replace, Model 53-B
Seat Belt, Rear, Remove and Install or Replace - Model 53-B
Remove, Disconnect
Front quarter panel - see operation "Front quarter panel, remove and install - Model 53-B". close folding hood. Remove safety belt trim (1) rear safety belt - remove retaining bolt (2), inertia reel retractor with holding plate - 3 screws (3) (4th screw when removing front quarter panel), inertia reel retractor from holding plate- 1 screw (4).
Install, Connect
Inertia reel retractor on holding plate for rear safety belt - tightening torque 35 Nm. rear safety belt trim, front quarter panel.
Remove, Disconnect 
Install, Connect 