Operating Cables, Replace Both Always replace operating cables in pairs.
Remove, Disconnect Control unit - see operation "Control unit, replace", water deflector panel - see operation "Water deflector panel (gutter), replace", crank drive or electric drive - see operation "Crank drive, remove and install" or "Electric drive, remove and install", slide block guide - pull out half way to guide end. Lock washer (2), bolts (1), sliding block cable, cable from cable groove (3).
Install, Connect |
|
Cable, cable guide, sliding block guide, crank drive or electric drive, water deflector panel, operating unit.
Adjust Cables - see operation "Control Cables, both, basic Adjustment". |
|
|