vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Table 5 - Test Steps 02/03/04 Introduction > < Table 2 - Trouble Code Table: Trouble Code 35 RETURN PUMP RELAY CIRCUIT

Table 5 - ACTUATOR TEST

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

 

01

SELECT ACTUATOR RET. PUMP RELAY

Ignition ON

Press key F5 (Actuator Test), select the desired test with the arrow keys and confirm with YES.  Follow the instructions in the TECH 1 display.

 

Note:

The relay for the return pump is actuated for approx. 5 s. The pump must run while the relay is actuated. Control units terminals for pump relay:

ABS-2E:

Ter. 14 and 10 and Ter. 17 and 28

ABS-2EH with ETC:      Intern.

ABS-2EH without ETC: Intern.

ETC = Electronic Traction Control

 

Pump running

35

See

"Note"

 

 

Notes for Trouble-shooting:

 

Nominal Value:

 

Cause of Fault:

 

 

·        Trouble-shooting according to FO:DATA LIST test step 08

 

 

 


Related Literature Units
-Table 2 - Trouble Code Table: Trouble Code 35 RETURN PUMP RELAY CIRCUIT

Table 5 - Test Steps 02/03/04 Introduction > < Table 2 - Trouble Code Table: Trouble Code 35 RETURN PUMP RELAY CIRCUIT