|
Brake shoe adjustment |
Adjustment not necessary, automatic adjustment |
|
Parking brake adjustment: |
|
|
Disc brake, rear |
Put parking brake lever on second notch. Loosen brake cable compensating yoke, until adjusting nut is flush with threaded rod. Carry out wheel adjustment with screwdriver. Tighten brake cable compensating yoke until braking effect begins (same on both wheels). Parking brake must be firm on the 7th notch. |
|
Drum brake |
Turn adjust nut on brake compensating yoke until wheels stop. Then loosen adjusting nut until wheels are free. On second notch, braking effect must begin. When doing so, the cam at the brake shoe lever can be lifted max. 2 mm/0.079 in. |
|
Brake light switch |
The brake light must come on following a pedal movement of 20 +/ - 5 mm (measured at the pedal) |
