Vauxhall Workshop Service and Repair Manuals

Recommended Torque Values  

	Nm
Cover sheet for control arm	4
Stop screw - Ate master brake cylinder	6
Brake proportioning valve to brake pressure hose	16
Brake proportining valve to master brake cylinder - GMF- Version	40
Brake proportining valve to master brake cylinder - Ate- Version	12
Brake servo upper support to brake servo lower support	22
Brake servo to bracket	20
Brake servo with bracket to bulkhead	18
Brake calliper to steering knuckle (front wheel brake)	95
Brake calliper to retainer frame (rear wheel brake)	80

Recommended Torque Values (Continued)  

	Nm
Brake calliper to retainer frame (guide bolt)	30
Brake disc to wheel bearing unit (detent screw)	4
Brake disc to front wheel hub (detent screw)	7
Brake drum to wheel bearing unit (detent screw)	4
Speed sensor to bracket	8
Bleeder screw to brake calliper or wheel brake cylinder	6
Speed sensor bracket to spring strut	8
Retainer frame to brake calliper housing	95
Hydraulic modulator bracket to front frame	10
Parking brake lever to vehicle underbody	20

Recommended Torque Values (Continued)  

	Nm
Master brake cylinder to brake servo	22
Banjo bolt, brake pressure hose to brake calliper	40
Hydraulic modulator to bracket	8
Lock nut, piston rod to fork	18
Pedal axle to pedal support bracket	18
Wheel brake cylinder to brake carrier plate	9
Wheel bearing unit with brake anchor plate to rear axle	50 + 30 ° + 15 ° 1)
Wheel to wheel hub	110
TC servo motor to TC throttle body	7
Union nut, vacuum pipe to connection piece or to vacuum pump	18
Union bolts on all brake lines	16

1)  Use new fixing nuts