Crankshaft Out-of-Round, Check
Remove, Disconnect
Remove crankshaft bearing cap.
Attach Dial Gauge MKM-571-B with dial gauge bracket to cylinder block. Attach probe of Dial Gauge MKM-571-B to crankshaft bearing journal.
Measure
Turn crankshaft smoothly. Maximum out-of-round: 0.03 mm.
Install, Connect
Remove holder with Dial Gauge MKM-571-B.
Install crankshaft bearing cap with new bolts to cylinder block - tightening torque 50 Nm/37 lbf. ft. + 45 ° +15 ° .