Flywheel, Remove and Install
Remove, Disconnect
Remove clutch - see operation "Clutch Plate and Pressure Plate, Remove and Install" in group "K".
Block flywheel with KM-652. loosen fastening bolts and remove flywheel.
Install, Connect
Block the flywheel with KM-652 und fit new fixing bolts and bolt locking (red) - tightening torque 30 Nm + 45 ° bis 60 ° .
Fit clutch - see operation "Clutch plate and pressure plate Remove and Install" in Group "K".
Remove, Disconnect 
Install, Connect 