vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

1st Cylinder TDC, Adjust > < Oil Consumption, Measure

 

Charge Pressure, Check (X 17 DTL)  

Object Number: 616196  Size: DEFAULT  Inspect   

Check that entire intake system is in good condition.  

Object Number: 616192  Size: DEFAULT  Install, Connect   

Detach charge pressure hose (1) from injection pump. Insert Vacuum Hand Pump MKM-667 with suitable adapters between fuel injection pump and charge pressure hose.  

Object Number: 616196  Size: DEFAULT  Inspect   

Start engine and allow to race without load. The charge pressure may only increase to a maximum of 70 kPa (0.70 bar) at 4500 rpm.  

Object Number: 616191  Size: DEFAULT  Remove, Disconnect   

Remove Vacuum Hand Pump MKM-667 with adapters.  

Install charge pressure hose to injection pump.  

Object Number: 2394740  Size: DEFAULT

 

 

1st Cylinder TDC, Adjust > < Oil Consumption, Measure