vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Cold Start Acceleration, Check and Adjust > < Idle Speed, Check and Adjust

 

Upper Idle Speed, Check and Adjust  

Engine at operating temperature (oil temperature ≥ 80 ° C/176 ° F).  

Object Number: 616196  Size: DEFAULT  Inspect   

Mark crankshaft pulley with 1 to 2 cm/0.4 to 0.8 in. wide piece of aluminium foil (arrow). Full throttle and measure engine speed with photo-electric rev counter.  

Object Number: 616198  Size: DEFAULT  Adjust   

Remove seal. Release locknut (1) and adjust end stop screw (2) accordingly. Upper idling speed 5200 min -1 .  

Object Number: 616192  Size: DEFAULT  Install, Connect   

After adjustment, secure stop screw with lock nut and apply lead seal (3).  

Object Number: 2393031  Size: DEFAULT

 

 

Cold Start Acceleration, Check and Adjust > < Idle Speed, Check and Adjust