Remove footwell panelling. Detach accelerator Bowden cable from accelerator pedal. Remove retaining ring (7) and remove guide sleeve (8). Remove retaining ring (3). Remove shim (2), split washer (4) and guide sleeve (5). Remove accelerator pedal with spring (6) from bracket.
Install, Connect Insert accelerator pedal with spring in bracket - note correct installation position of spring. Slide on guide sleeve (5), split washer (4) and shim (2) and secure with retaining ring (3). Slide on guide sleeve (8) and secure with retaining ring (7). Attach accelerator Bowden cable to accelerator pedal. Install footwell panelling. |