· Ignition ON
· Engine speed <
23 rpm
· Trouble code 19
not yet stored
· Since ignition ON,
there has not yet been a start with correct synchronization
Note:
Trouble code 31 is always displayed when the ignition is
switched on. As soon as an engine speed signal is received from the pulse
pick-up on starting, the fault is deleted if the system is intact and does
not remain stored.
If trouble code 31 was recognized, no replacement value is
used for the engine speed signal.
For the mixture and requirement adaption, current values
are used and neutral values are used for idle control and characteristic
curve adaption.
|