Conditions for setting fault:
The fault is recognized by the control unit if
· over a period of
time t > 2.55 s
· the oxygen sensor
voltage is > 1.099 V
(short circuit to battery voltage)
Conditions for storage of fault:
The fault is stored and the replacement value called up if
the following conditions are fulfilled consecutively:
1.) Coolant temperature > 69.6 °C/157.28 °F
2.) Condition 1.) is fulfilled for 174 s
3.) Load signal > 3.5 ms
4.) After conditions 1.) to 3.) are fulfilled, waiting
time of 5.12 s elapsed
5.) Trouble code 73 or 74 not recognized
Replacement value:
If trouble code 39 was recognized, the control unit takes
450 mV as replacement voltage.
|