Vauxhall Workshop Service and Repair Manuals

Trouble

Code

Information Sensor

Cause of Fault

Remedy in

F0:DATA LIST

No.

Trouble Code Storage when ...

Remarks

97

IGN./INJ. CUTOFF

SIGNAL VOLTAGE

HIGH

18

·   Ignition/injection cutoff signal from TC (Traction Control)

     control unit is present for longer than 2.5 s

Note:

After each engine start, the Motronic control unit monitors inputs Ter. 38 (full load prohibition) and Ter. 50 (ignition/injection cutoff).

The TC control unit sends test signals to these inputs.

If the Motronic control unit receives both or neither of these test signals, this is evaluated as "TC OK". If only one test signal is recognized, the other test signal is evaluated as being faulty and the telltale is switched on.

Replacement value:

The ignition/injection cutoff signal is ignored by the control unit.