MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ) F2:TROUBLE CODE TABLE
Trouble
Code
Information Sensor
Cause of Fault
Remedy in
F0:DATA LIST
No.
Trouble Code Storage when ...
Remarks
55
REPLACE
ECU
-
· Ignition ON
· Engine OFF
If trouble code 55 was recognized, carry out the following instructions:
· Disconnect battery;
· Reconnect battery;
· Delete trouble code and read out trouble codes again;
· If trouble code 55 still occurs; replace control unit;
On fault recognition, the vehicle does not start.