 Important! Fuel escapes - observe safety and local regulations. Fuel system is under pressure. Remove fuel pump relay - see operation "Fuel Pump Relay, Remove and Install". Start engine at least 5 sec. - fuel pressure reduction.
 Remove, Disconnect Remove air intake hood from throttle valve injection housing - note seal ring.
 Install, Connect Install fuel pressure gauge MKM-588-A (1) in the fuel supply line. Install fuel pump relay.
 Inspect Start engine and read fuel pressure. Required fuel pressure - see corresponding test instruction. | 
|
Important! Fuel escapes - note local safety regulations. Fuel system is under pressure. Remove fuel pump relay. Start engine for at least 5 sec. - fuel pressure reduction.
Remove, Disconnect Remove fuel pressure gauge MKM-588-A from fuel supply line.
Install, Connect Attach fuel feed line to throttle valve injection housing. Install air intake hood at throttle valve injection housing - note seal ring. Install fuel pump relay - see operation "Fuel Pump Relay, Remove and Install".
|
