MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14
NZ) Quick Check F0: DATA LIST
No.
TECH 1 Display
Conditions for Checking
Nominal Value
Trouble Codes
Ter-
minal
15
VEHICLE
SP.PULSE
Ignition
OFF
Wait
a few seconds
Ignition
ON
Engine
running at idle speed, operating temperature
Slowly
move vehicle at least 2 m/2 yards to and fro
Note:
After
the vehicle has been pushed and is stationary again, the TECH 1 display may
indicate a vehicle speed greater than 0 km/h (MPH). This is however not a
fault, as the display is only reset when the vehicle moves.