vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Idle Air Control Stepper Motor > < Oxygen sensor, remove and install

MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ)      Quick Check F0: DATA LIST 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Ter-

minal

08

O2 SENSOR 

 

Ignition ON

Engine cold

Engine running at idle speed, operating temperature

 

Only during test drive:

At full load below 4000 rpm

At full load above 4800 rpm

 

 

350 to 550 mV

50 to 950 mV

(alternating)

 

500 to 1000 mV

50 to 950 mV

(alternating)

13, 44, 45

D 7 / D 6

 

 

 

 

 


Related Literature Units
-F2:TROUBLE CODE TABLE Trouble Code 13 02 SENSOR OPEN CIRCUIT
-
-

Idle Air Control Stepper Motor > < Oxygen sensor, remove and install