vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Intake air pre-heating, check > < Resonator, remove and install

 

Engine management system Multec central injection (C 14 NZ, X 14 NZ, 16 NZR, C 16 NZ, X 16 SZ, X 16 SZR, 16 LZ2 and C 18 NZ)  

Engine compartment monitoring (C 14 NZ, X 14 NZ and C 16 NZ)  

 

1  Engine control unit (installation position in right footwell)  

2  Intake manifold pressure sensor  

3  Injection valve  

4  Throttle valve potentiometer  

5  Exhaust gas recirculation valve (C 16 NZ)  

6  Octane number plug  

7  Ignition coil  

8  Ignition distributor  

9  Oxygen sensor  

10  Idle speed stepper motor  

 

Object Number: 2383277  Size: DEFAULT

 

 

Intake air pre-heating, check > < Resonator, remove and install