Multec M (14 SE / C 14 SE / C 16 SE) F2:TROUBLE CODE TABLE
Trouble
Code
Information Sensor
Cause of Fault
Remedy in
F0:DATA LIST
No.
Trouble Code Storage when ...
Remarks
55
REPLACE
ECU
-
· Ignition ON
· Engine OFF
If trouble code 55 was recognized, carry out the following instructions:
· Disconnect battery;
· Reconnect battery;
· Delete trouble code and read out trouble codes again;
· If trouble code 55 still occurs: replace control unit.
On fault recognition, the vehicle does not start.