vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODE TABLE - Trouble Code 41 EST LINE COIL CYL 2+3 VOLTAGE HIGH > < F2: TROUBLE CODE TABLE - Trouble Code 33 MAP SENSOR VOLTAGE HIGH

Multec-S X 14 XE /  X 16 XE (L)5            F2:TROUBLE CODE TABLE

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

34

MAP SENSOR VOLTAGE LOW

06

·   Engine speed higher than 1050 rpm

·   Following trouble code not stored: 21

·   Throttle valve aperture greater than 18.8 %

·   Intake manifold absolute pressure lower than 14 kPa (140 mbar)

·   Above conditions must be fulfilled for at least 0.06 s.

 

or

 

·   Engine speed lower than 1050 rpm

·   Following trouble code not stored: 21

·   Intake manifold absolute pressure lower than 14 kPa (140 mbar)

·   Above conditions must be fulfilled for at least 0.06 s.

 

Replacement value:

·   Engine not running:     Intake manifold pressure equals 90 kPa

·   Engine running:           The control unit calculates the intake manifold pressure depending on the engine speed and throttle valve position

 

Effects:

·   The secondary air injection system is switched off

·   The mixture adaptation long term correction is switched off

 

 

 

 

 

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 06 MAP SENSOR

F2: TROUBLE CODE TABLE - Trouble Code 41 EST LINE COIL CYL 2+3 VOLTAGE HIGH > < F2: TROUBLE CODE TABLE - Trouble Code 33 MAP SENSOR VOLTAGE HIGH