Multec-S X 14 XE
/ X 16 XE (L) F0:DATA LIST
|
No.
|
TECH 1 Display
|
Conditions for
Checking
|
Nominal Value
|
Trouble Codes
|
Terminal
|
|
40
|
DES.
IDLE DRIVE
|
AT vehicles:
Ignition ON
Engine running at idle speed,
operating temperature
Nominal idle speed for selector lever positions
"R", "D", "3", "2", and "1"
have not been altered
(basic adjustment after control unit reset)
|
|
-
|
-
|
|
|
|
X 14 XE AT:
|
775 rpm
|
|
|
|
|
|
Nominal idle speed for selector
lever positions "R", "D", "3", "2",
and "1" has been programmed
|
The nominal engine idle speed
set in F6: Miscellaneous Tests, F0: Adjustments must appear in this display
|
|
|
|
|
|
Note:
The nominal engine speed is a
programmable value.
If F0:DATA LIST no.: 41 is ACTIVE, the nominal engine speed has
been reprogrammed.
If F0:DATA LIST no.: 41 is INACTIVE, the nominal engine speed
has not been altered or the control unit has been reset. In this case, ignore
this TECH 1 display. A randomly selected value will be displayed
|
|
|
|
|
|
|
|
|
|
|
|
