Note:
In this control mode, TECH 1 specifies the idle speed that
is to be maintained to the control unit.
The engine speed can be set to a fixed value using the arrow
keys. In addition, the YES and NO keys can be used to display the various
data list parameters. Using the F9 key, it is possible to store data as in
the snapshot mode.
This mode should be used when it appears necessary to evaluate
the various engine parameters (e.g. O2 INTEGRATOR or INJECTION PULSE) at a
fixed / increased idle speed, or when it is to be determined whether the idle
speed adjuster operates smoothly and without sticking over the entire opening
range.
|