Vauxhall Workshop Service and Repair Manuals

Intake Manifold Pressure Sensor, Remove and Install  

  Remove, Disconnect   

Lift rubber seal (1) and remove intake manifold pressure sensor (2) with bracket.   Disconnect wiring harness plug and vacuum hose from intake manifold pressure sensor.   Compress retaining pins in openings (3) with pliers and remove intake manifold pressure sensor from bracket - do not damage components.     Install, Connect    Slide intake manifold pressure sensor (4) onto bracket (5) - ensure correct seating.   Connect wiring harness plug and vacuum hose to intake manifold pressure sensor   Insert intake manifold pressure sensor with bracket and attach rubber seal.