vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Exhaust Emissions Test F1:Circuit Test No.27 - O2 SENSOR > < F2:Trouble Codes - Trouble Code No. 44 LEAN EXHAUST

Multec- S X 14 XE / X 16 XE(L)        F2:TROUBLE CODES

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when...

45

RICH EXHAUST

27, 28, 29, 30, 31, 32, 33

·   Engine running for at least 40 s

·   Following trouble codes not stored: 21, 22, 33, 34

·   Oxygen sensor loop closed

·   Integrator value not equal to 128 steps (not reset condition)

·   Coolant temperature higher than 75 °C/167 °F

·   Throttle valve opening greater than 0 %

·   The fault is recognised by the control unit if the oxygen sensor voltage is higher than 743 mV for longer than 17 s.

 

Replacement value:

·   450 mV

 

Effects:

·   Oxygen sensor regulation is switched off, i.e. open oxygen sensor loop

 

Note:

Oxygen sensor must not be wrapped in aluminium foil. Remove foil.

Then erase trouble code. If trouble code 45 is set again, start trouble- shooting according to F0:Data List no. 27.

 

 

 

 

 

 

 

 


Related Literature Units
-F0:Data List Test Step 27 O2 SENSOR
-
-
-
-
-
-

Exhaust Emissions Test F1:Circuit Test No.27 - O2 SENSOR > < F2:Trouble Codes - Trouble Code No. 44 LEAN EXHAUST