Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

04

SELECT ACTUATOR IGN. COIL CYL2*4

Ignition OFF

Connect checking spark plug (2+3)

Ignition ON

Engine OFF

Press F5 key in the system main menu, select the desired test with the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

Note:

The checking spark plug is actuated at a frequency of 2 Hz (actuation duration 10 ms).

The test is completed after a maximum of 30 s.

Ignition spark visible at checking spark plug

41, 63

C 3/ D 1

Trouble - shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

see F0: DATA LIST test steps 25, 26, 29, 30