vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Diagnostic Information and Procedures > < TABLE 2, TROUBLE CODES - Trouble Code 57 IDLE AIR CONTROL VOLTAGE LOW

 

Hot Film Mass Air Flow Meter, Remove and Install  

Object Number: 616191  Size: DEFAULT  Remove, Disconnect   

Disconnect wiring harness plug (2) from hot film mass air flow meter. Loosen hose clamps (1) and remove hot film mass air flow meter from air intake hoses.  

In the event of external damage (e.g. deformation of grid), replace hot film mass air flow meter.  

Object Number: 616192  Size: DEFAULT  Install, Connect   

Insert hot film mass air flow meter in air intake hoses - ensure hose conditions are in good condition and correctly seated. Air intake hose must engage in recesses (arrows) in hot film mass air flow meter.  

Tighten hose clamps (1). Connect wiring harness plug (2) to hot film mass air flow meter.  

Object Number: 2392489  Size: DEFAULT

 

 

Diagnostic Information and Procedures > < TABLE 2, TROUBLE CODES - Trouble Code 57 IDLE AIR CONTROL VOLTAGE LOW