vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 09 MASS AIR FLOW S. > < F0: DATA LIST - Test Step 07 INTAKE AIR TEMP.

FO: DATA LIST

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

 

08

COOLANT TEMP.

Engine running at idle speed, operating temperature

80 to 110 °C / 176 to 230 °F

1.5 to 0.8 V

 

14, 15

5, 19

 

Note:   TECH 1 checks the temperature value of coolant temperature sensor P30 at Ter. 5 of the control unit. The voltage value is also displayed.

 

Notes on Trouble - shooting:

Nominal Value:

Cause of Fault:

 

·     Engine Off, ignition On.

       Disconnect plug from coolant temperature sensor P30

lower than - 35 °C / - 31 °F

greater than 4.9 V

·     Short circuit between signal and ground leads in wiring harness

·     Control unit K69 defective

 

 

·     Short - circuit both contacts in coolant temperature sensor using adapter lead from Electronic - Kit I KM - 609

greater than 180 °C / 356 °F

lower than 0.1 V

·     Lead interruption from

       -      control unit K69 / Ter. 5 to coolant temperature sensor P30 / Ter. 1

       -      coolant temperature sensor plug P30 / Ter. 2 to ground

·     Control unit defective

 

 

Nominal values are attained

 

Checking values for coolant temperature sensor:

 

 

3.3 - 1.5 kW at

+ 10 °C / 50 °F to

+ 30 °C / 86 °F

300 - 360 W at

+ 80 °C / l76 °F

 

·     Coolant temperature sensor P30 defective

 

 

 


Related Literature Units
-TABLE 2, TROUBLE CODES - Trouble Code 14 COOLANT TEMP. VOLTAGE LOW
-

F0: DATA LIST - Test Step 09 MASS AIR FLOW S. > < F0: DATA LIST - Test Step 07 INTAKE AIR TEMP.