· The control unit did not
recognise 58 teeth pulses between the synchronising marks on the crankshaft
pulley
· The time in which a tooth
gap was recognised is not plausible
· If trouble code 19 and an
engine speed higher than 8000 rpm were recognised, trouble code 92
(camshaft fault) is also stored
(short circuit to ground or circuit interruption)
(short circuit of signal lead to oscillator lead)
(loose contact in signal leads)
· Conditions must be
fulfilled for at least 3.5 s
Replacement
values:
Camshaft
emergency operation:
· The crankshaft position,
engine speed and firing angle output are calculated from the camshaft signal
· The engine speed is
limited to 4512 rpm
Effects:
· If trouble code 92 is
stored in addition to trouble code 19, injection and ignition are blocked
Note:
Emergency
operation remains active until next ignition OFF.
|