vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODE TABLE - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW > < F2: TROUBLE CODE TABLE - Trouble Code 73 MASS AIR FLOW SENSOR VOLTAGE LOW

Simtec 56.0/ 56.1          F2:TROUBLE CODE TABLE

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

74

MASS AIR FLOW SENSOR VOLTAGE HIGH

09

·   Engine speed higher than 672 rpm

·   Mass air flow meter signal higher than 505 kg/ h (short circuit to voltage)

·   Conditions must be fulfilled for at least 3 s

 

Replacement values:

·   Trouble codes 21 and 22 not recognised:

     The control unit calculates with an air mass computed internally from the engine speed and the throttle valve angle

·   Trouble code 21 or 22 recognised:

     The control unit calculates with an air mass resulting from the engine speed

 

Effects:

·   With the exception of throttle valve adaptation, all adaptation is blocked

·   Tank vent valve regulation is blocked

If trouble codes 21 or 22 were recognised:

·   Oxygen sensor regulation is blocked

 

Note:

In case of a fault, the system immediately switches to emergency operation.

 

 

 

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 09 MASS AIR FLOW S.

F2: TROUBLE CODE TABLE - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW > < F2: TROUBLE CODE TABLE - Trouble Code 73 MASS AIR FLOW SENSOR VOLTAGE LOW